COATED WIRE PAYOUT & LINE POST INSTALLATION
For More Details,
Tips & Techniques
on Building Fences,
Please visit our website:
www.horserail.com
Horserail
®
Products
• Joining Buckle
• Hotcote
®
Insulator
• PolyPickets
(Optional)
Additional Products
• Wider 2”(51mm) Barbed
Staples
• 2”(51mm) Barbed Staples
• Clips for PolyPickets
Other Tools Needed
• Hammer
• Bolt Cutters
• Spinning Jenny
Other Related PDF Info Sheets
• How To Mark Posts
• Hotcote
®
End Post
Attachment
• Horsecote
®
End Post
Attachment
• Donut Tensioner for Coated
Wire - Installation
Procedures for both Hotcote
®
and Horsecote
®
shown
1
2
Hotcote
®
Horsecote
®
1
2
3
End Buckle is already attached to the post
(see “Horsecote
®
End Post Attachment” PDF).
For proper wire spacing, see “How to Mark Posts” PDF.
Use a 2”(51mm) Barbed Staple driven to allow coated wire to move.
For better holding strength - drive staple at the proper angle
(see Diagram A)
.
OPTION: Use line post tube insulators, such as our Hotcote
®
Insulator for protection
against damage from abrasion. Slide onto coated wire before lacing it through
buckle. If used, attach with a Wider 2”(51mm) Barbed Staple.
Final tension fence
(see “Donut Tensioner for Coated Wire - Installation” PDF)
.
2
1
Patent Number: D613,570S; Pat. No. Des. D658,478 and other Patents Pending
SAFETY FIRST: USE SAFETY EYE GLASSES AND GLOVES.
Insulated End Buckle is already attached to the post
(see “Hotcote
®
End Post Attachment” PDF).
For proper wire spacing, see “How to Mark Posts” PDF.
Slide on the appropriate number of line post tube insulators, such
as our Hotcote
®
Insulator, prior to inserting Hotcote
®
into the
Insulated End Buckle on the post.
Use a Wider 2” (51mm) Barbed Staple driven to allow coated wire
to move. For better holding strength - drive staple at the proper
angle (see Diagram A).
Final tension fence
(see “Donut Tensioner for Coated Wire - Installation” PDF)
.
3
2
1
Coated Wire Payout
You must use a spinning jenny. Only dispense the
minimum amount of wire(s) needed as you proceed.
(Do not pull the full length of the wire out all at
once). This will help to avoid tangling and prevent
product scuffing, which could happen if too much
coated wire is payed out and left to be pulled and
dragged over gravel, stones, etc. during installation.
PolyPickets
(Optional)
Diagram A
Allows greater post spacing
(saves money) and stops
wire separation
- Available in white and black
- Used for both Hotcote
®
and
Horsecote
®
- Clips sold separately
JWI8765_CWPLPI_1115
Staple Installation
Just – buckle it up!
Horserail
®
, Hotcote
®
, and Horsecote
®
are registered trademarks of John Wall, Inc. 2015